Description
AEROFIX is Polymeric rigid foam hanger with foam tape and self-sealing tape designed for supporting and insulating liquid cooling and heating lines at hanging point. Its closed cell, rigid structure AEROFIX make ideal for use as rigid foam hanger especially for liquid cooling lines to prevent condensation and saving energy.
AEROFIX made from polyether polyols based materials in combination with flame retardants by high pressure processing machine and molded in individual patterns. The polymeric rigid foam character is evident in that the foam is not fusible, has high softening point and exhibits good resistance to chemicals and solvents.
AEROFIX has skins both inner and outer surface and lining with rubber foam on the inner surface to absorb vibration of operating pipeline. The outer surface consists of rubber tape which seals the hanger completely after installation in addition to prevent moisture penetration to cold pipeline.
Specification
| PHYSICAL PROPERTIES | Dia < 4” | Dia 4” - 9” | Dia >= 10 | TEST METHOD |
|---|---|---|---|---|
| Density (kg/m3) | 120 - 140 | 220 - 280 | 260 - 320 | ASTM D 1622 |
| Thermal Conductivity (W/mK at 24°C) | <= 0.035 | <= 0.040 | <= 0.045 | ASTM C 518 |
| Water Absorption (% by weight) | < 10 | < 10 | < 10 | ASTM D 1056 |
| Compression Strenght at Yield (kgf/cm2) | > 10 | > 20 | > 30 | ASTM D 1621 |
| Flammability | Self-Extinguishing HB | Self-Extinguishing HB | Self-Extinguishing HB | ASTM D 635 UL 94-HB |
| Temperature Range | -57C to +125C | -57C to +125C | -57C to +125C | Can be used even at -200C |
Advantages
- Easy to handle one-piece unit
- With self-adhesive tape for fast installation
- Easy and quick (installation)
- Sizes correspond to tube sizes of Aeroflex
Aerofix Stand
Polymeric rigid foam supporter with foam tape and self-sealing tape
Description
AEROFIX STAND is polymeric rigid foam with foam tape and self-sealing tape designed for supporting and insulating liquid cooling and heating lines at pipe load point. Its closed cell structure prevents condensation and saves energy on chilled water pipe.
AEROFIX STAND is made from polyether polyols base with flame retardants, mixed and molded under high pressure process. Aerofix-Stand has rubber foam lining on the inner surface which absorbs vibration of operating pipeline. The outer surface consists of rubber tape which seals the seam completely to prevent moisture penetration after installation.
Specification
| PHYSICAL PROPERTIES | Dia < 4” | Dia 4” - 9” | Dia >= 10 | TEST METHOD |
|---|---|---|---|---|
| Density (kg/m3) | 120 - 140 | 220 - 280 | 260 - 320 | ASTM D 1622 |
| Thermal Conductivity at mean temp. 24°C (W/mK) | <= 0.035 | <= 0.040 | <= 0.045 | ASTM C 518 |
| Water Absorption (% by weight) | < 10 | < 10 | < 10 | ASTM D 1056 |
| Compression Strenght at Yield (kgf/cm2) | > 10 (> 1000) | > 20 (> 2000) | > 30 (> 3000) | ASTM D 1621 |
| Flammability | Self-Extinguishing HB | Self-Extinguishing HB | Self-Extinguishing HB | ASTM D 635 UL 94-HB |
| Temperature Range | -57C to +125C | -57C to +125C | -57C to +125C | Can be used even at -200C |
Advantages
- Easy to handle one-piece unit
- With self-adhesive tape for easy and quick installation
- Sizes correspond to Aeroflex tube insulation
Installation
- insulation slides over pipes.
- pipe-hanger inserts are put into place and glued to insulation.
- Joints are wrapped and sealed with PROTAPE.
